Troubleshooting Windows 10 Can’t Connect To This Network Issue

A day without internet is merely a digital blackout. And there had been many incidents where Windows 10 users have struggled with the issue where their OS couldn’t connect to a network. Well, that’s not a big deal and can be resolved easily. Here are some solutions for you.

Uninstall Your Network Adapter

Its because there could be a problem with the network adapter. It could have become corrupt. So, launch the device manager by searching it in the Start menu search bar.

Find your network adapter, right-click on it and select uninstall. Check the box that has the option of deleting the driver from your device and click ok. Now, reboot your system and Windows will automatically find and install the proper driver.

Update Network Adapter Driver

This issue might also occur due to the outdated driver. So, you need to update the driver of your network adapter. Go to the manufacturer website of your system and enter the laptop model number and the OS you are using. Find the driver for your network adapter, download and install it. Now, restart your system and see if Windows 10 can connect to the network.

You can also use Windows utility to update the driver or any other tool that you find over the internet. These tools can find all the drivers that need to be updated, and with one click, you can complete the process as well.

Disable IPv6

Open the run command by pressing Windows and R keys together. In the command box type ncpa.cpl and press enter. Select your network adapter and right-click on it. Go to the properties and uncheck the box next to TCP/IPv6. Click on Ok and exit the window. Now see if the issue is resolved.

Use Network Troubleshooting Commands

Hold down Windows and X keys together for launching the command prompt with Admin rights. In the command prompt window type netsh winsock reset and hit enter. Next, type netsh int IP reset and press enter again.

Then type ipconfig /release with space after ipconfig and hit enter. Now type ipconfig /renew and press enter again. And lastly, type ipconfig /flushdns and hit enter again. Remember there is space after every ipconfig.

With these commands, you have released and renewed your IP configuration and flushed the DNS server. Exit the prompt and restart your system for the change to take effect. This should make your Windows 10 able to connect to the network now.

Run Windows Network Troubleshooter

Windows troubleshooter is a fantastic tool for finding and resolving many issues related to your OS. Go to the search bar in the start menu and search for the network troubleshooter. From the list select the option that offers to identify and repair the problems related to the network. Follow the commands in it and when done, check if the issue is resolved.

Change Channel Width For Your Network Adapter

If you haven’t set the channel width of your network adapter properly, you might encounter this problem. Press and hold down the Windows and S keys and type network in it. From the list select network and sharing center and launch it. Go to the adapter option and changing the settings.

Find the adapter of your wireless device and right click on it to go to its properties. Open the properties and go to the advanced tab. Change the value of 802.11 channel width to 20 MHz. If this doesn’t resolve the problem, try the other values and see which one is best suited for you. Finally, save the change and exit the window.

Set Adapter And Router To Same Security Settings

Your system and your router should be on the same security settings. Go to the network and sharing center and manage wireless networks. Right click on your network and select properties. Find the security type in the security tab and set it to the same as your router. Click OK and save the changes. This must resolve the issue.

Forget The Wireless Connection

You can also try forgetting the wireless connection. For doing that, go to the Network and internet option in the settings window and navigate to the wifi section. Select manage wifi settings option and move down to manage networks option. Select your network and click on forget. Exit the window and search for the same network, enter the security key and connect.

More Options

If these options don’t work, you can change the mode of your wireless network, delete and reinstall the driver or disable and enable the connection if your system can’t connect to a network. You can also use ipconfig/release command to troubleshoot this issue. One of the above methods will resolve the issue for you. Sometimes, you might need to use them in combination but Windows 10 will be able to connect to your network again.

Leave a Reply

Your email address will not be published. Required fields are marked *